Retractable Bed Step Manual Pull | Chevy/GMC 1500 (19-26)
Đ 1.462
Brand: Rough Country.
Chevy/GMC 1500 (19-26).
- May not work with aftermarket exhaust systems.
- Does NOT fit ZR2 Bison Edition models as they are equipped with an AEV Bison rear bumper.
- Installs on the driver’s side of the vehicle. ONLY.
Tired of climbing up like you’re scaling a wall just to reach your gear? The Rough Country Manual Bed Step is your answer for quick and easy access. With a simple tap of your foot, this step drops 5″, giving you that extra boost to reach what you need without breaking a sweat. Whether you’re tossing in tools or loading up camping gear, the Rough Country Bed Step has your back (and your knees).
5-Inch Drop: Say goodbye to awkward stretches and hops; this step gives you a 5-inch drop, so reaching into your truck bed feels like second nature.
Foot-Push Deployment: No need to fumble around with handles or levers. Just give it a gentle nudge with your foot, and the step is ready to roll, supporting up to 330 lbs!
Wide and Secure: With a 6″ wide, non-slip surface, the die-cast aluminum board keeps your footing solid—even when your boots are muddy or it’s pouring rain.
Durable Die-Cast Aluminum: Built tough with lightweight yet super-strong die-cast aluminum, this step will withstand the roughest terrain and hardest working days.
Easy Bolt-On Installation: No need to bust out the big tools or fumble with complicated installations. This step bolts right on for a quick and easy setup.
Give your truck the upgrade it deserves with the Rough Country Manual Bed Step. Invest in a step that’s built to last, and make accessing your truck bed easier than ever.
- Easy bolt-on installation, no drilling required!
- 6″ wide lightweight, non-slip durable die-cast aluminum board.
- Provides a 5″ drop for ease of access to truck bed.
- 330lb weight rating.
- Deploys easily with a slight push of the foot
Related Products
Fits on : GMC Sierra 1500 ( 2019 2020 2021 )
5 in stock
This part usually ships 20 days after payment.
- Titanium Tow Hook with Red D-Ring
- Front and Rear
- High-Strength Titanium Construction
- Red Anodized D-Ring for High Visibility
- Corrosion and Weather-Resistant
- Lightweight Design
- Compatible with Both Front and Rear Installations
- Limited Lifetime Warranty
- Easy Installation
- Fits 2014-2026 Corvette C7 & C8
4 in stock
The AIRAID Throttle Body Spacer is designed to enhance mid-range torque using a patented Helix Bore which spins intake air going through the throttle body spacer. Includes mounting hardware.
The AIRAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it’s unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.
- Aircraft Quality Billet 6061-T6 Aluminum
- Improves Low End Torque And Throttle Response
- Gaskets/Hardware/Brackets Are Included
- Installs In Less Than 1 Hour
- No Drilling Or Cutting Required
- Provides Stronger Mid-Range Power
1 in stock
This part usually ships 20 days after payment.
- Side Skirts
- Left And Right Location
- High-Quality Polycarbonate Material
- Gloss Black Color Finish
- Screw-On Type
- Direct Fit Product Fit
- Includes Installation Hardware
- Maximizes Aerodynamic Attributes
- Enhances Car With Racing And Aggressive Look
- Accentuates Vehicle’s Overall Look
- Maintains Original Exterior Look
- Minor Drilling May Be Required
- Professional Installation Strongly Recommended
- Does Not Fit Z06 Model
- Fits Chevrolet C8 Corvette 2020-2026 Excluding Z06
5 in stock
Camshaft, Hydraulic Roller Tappet, Advertised Duration 266/276, Lift .500/.510, Chevy, LT1/LT4, Each.
4 in stock
Size : 20 x 8.0 offset +21
Hole 6H
Condition : Used.
Out of stock
2 in stock
This part usually ships 20 days after payment.
(14-19 Corvette C7)
- Window Louvers
- Made Of Durable UV-Resistant ABS Plastic
- Matte Black Finish
- Blocks Sun Glare And Reduces Interior Heat Buildup
- Improves Privacy
- Adds A Touch Of Style And Personality
- Easy To Install
- One-Year Warranty
- Fits 2014-2019 Corvette C7
| Louver Location | Rear Window |
| Louver Finish | Pre-Painted |
3 in stock
1 in stock
This part usually ships 20 days after payment.
- Vented Extractor Hood
- GT3R Style Design
- Enhanced Engine Cooling
- Lightweight Construction
- UV Resistant Finish
- Carbon Fiber Material
- Easy Installation
- Fits 2020-2026 Corvette C8 Models
| Hood Material | Carbon Fiber |
| Hood Style | Vented |
2 in stock
This part usually ships 20 days after payment.
- Lambo Door Kit
- Converts Horizontal Opening Doors To Vertical Opening
- Constructed From Hardened Steel
- Has Gas Shock Counterbalances for Easy Handling
- Reversible Upgrade
- Made in the USA
- Bolt-On
- Limited Lifetime Warranty
- Fits 2020 – 2026 Chevrolet Corvette C8s, Excluding Z06 Models
3 in stock
5 in stock




































































