Specification:
The Delco air temperature sensor is an analogue sensor with a 0 to 5 V output (working range is generally 0.5 V to 4.5 V). The sensor signal wire can be used with any Analogue Temperature (AT) input on compatible devices, see the signal pin table below. Connection is to a 0 V sensor ground, and is to the same device that is reading the signal. Both the 0 V and signal connection have no specific polarity and can be wired either way.
Suitable for use with:
M84 ECU
Hundred series ECUs
M1 series ECUs
All MoTeC data loggers
Related Products
- AED: د.إ 775
The 500 PSI (3446 KPa) TI pressure sensor is a 0 to 500 PSI gauge pressure sensor suitable for use with fluids in applications such as fuel, oil or coolant pressure.
1 in stock
- AED: د.إ 4.260
Nissan R35 GTR GT-R VR38DETT.
1 in stock
- AED: د.إ 40
This is the vehicle Specific harness required for the Installation of HKS Turbo timer.
3 in stock
1 in stock
- AED: د.إ 727
Used in many aftermarket ECU applications such as Haltech, Link, Motec, Emtron etc.
Also used in Innovate & AEM stand alone wideband gauges. Commonly used with dynos such as Mainline.
2 in stock
- AED: د.إ 2.350
MoTeC LTC (Lambda to CAN) module interprets the data from a wideband Lambda sensor and transmits sensor data for monitoring, control and diagnostics on a CAN bus.
It is compatible with any ECU, Dash or Logger present on the bus.
Available in several variants:
Bosch LSU 4.9 or NTK Lambda sensor.
Single or Dual sensor version.
200 or 650mm lengths (LTC Long)
1 in stock
- AED: د.إ 40
This item is the vehicle Specific harness required for the Installation of HKS Turbo timer.
3 in stock
- AED: د.إ 2.567
Condition : Used ( just used for 1 week only ).
The Defi Sports Display F (DSDF) is a multifunctional digital display for vehicles that uses the existing Defi Advance Control unit for an easy to install sensor information system.
1 in stock
- AED: د.إ 1.465
Condition : used.
Setting Mode allows full access to the 20×20 ignition timing and fuel correction maps.
1 in stock
- AED: د.إ 914
Condition : used.
Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) The factory engine harness does not need to be replaced and all critical accessories such as air conditioning continue to function. By using the optional Apexi Power FC Commander, the user can adjust and modify a wide range of settings. By changing various parameters and data, the Apexi Power FC will adapt to any of your performance needs.
1 in stock