MoTeC’s new 30 output Power Distribution Module (PDM30) is designed to provide electronically switched power to the various electrical systems in the vehicle such as motors, lights and solenoids, and electronic devices such as ECUs and data acquisition systems.
The module replaces conventional relays, fuses and circuit breakers, simplifying wiring and reducing weight, while increasing reliability
BASIC SPECIFICATIONS
OUTPUTS
8 x 20 A outputs—20 A continuous, 115 A transient (typical)
22 x 8 A outputs—8 A continuous, 60 A transient (typical)
INPUTS
16 x Switch inputs
COMMUNICATIONS
1 x CAN
DIAGNOSTIC INFORMATION
Output current and voltages
Input voltages
Error status
PHYSICAL
Connectors
1 x 34 pin waterproof connector
1 x 26 pin waterproof connector
1 x M6 stud
Case size 108 x 128 x 39 mm
Weight 270 gram
Related Products
- AED: د.إ 1.208
Customized wiring kit for Motec ECU.
Can be connected with original engine wires ( no need to fabricate the original wiring).
Recommended to work on it with professional electrical.
It was installed on GTR32 and everything is working normally with Motec M600.
Condition : used.
1 in stock
- AED: د.إ 1.083
2003-2006 Dodge Ram 1500-3500 5.7L Hemi
2005-2006 Dodge Durango, Jeep Commander, Jeep Grand Cherokee 5.7L Hemi
2007-2008 Dodge Grand Caravan, Jeep Wrangler, Pacifica 3.8L V6
2 in stock
- AED: د.إ 1.047
Computer Programmer, Max Energy, Ford, Pickup/SUV, 4.2/5.4L, V6/V8, Each
1 in stock
- AED: د.إ 1.465
Condition : used.
Setting Mode allows full access to the 20×20 ignition timing and fuel correction maps. The user can adjust any portion of this map.
1 in stock
- AED: د.إ 474
Used.
Normal condition, recommended to change the cluster glass.
No cracks , working perfectly.
1 in stock
- AED: د.إ 804
The 250 PSI (17230KPa) Honeywell MLH pressure sensor is a 0 to 250 PSI gauge pressure sensor suitable for use with fluids in applications such as fuel, oil or coolant pressure.
1 in stock
- AED: د.إ 676
The Delco air temperature sensor is an analogue sensor with a general working range of 0 to 110 °C.
1 in stock
- AED: د.إ 206
Not original speedometer just face design.
CONDITION : New
1 in stock
- AED: د.إ 4.260
Nissan R35 GTR GT-R VR38DETT.
1 in stock
- AED: د.إ 914
Condition : used.
Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) The factory engine harness does not need to be replaced and all critical accessories such as air conditioning continue to function. By using the optional Apexi Power FC Commander, the user can adjust and modify a wide range of settings. By changing various parameters and data, the Apexi Power FC will adapt to any of your performance needs.
1 in stock
- AED: د.إ 878
Condition : used.
Installation
Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) The factory engine harness does not need to be replaced and all critical accessories such as air conditioning continue to function. By using the optional Apexi Power FC Commander, the user can adjust and modify a wide range of settings. By changing various parameters and data, the Apexi Power FC will adapt to any of your performance needs.
The Apexi Power FC also comes preprogrammed with several base maps. (Currently with Japan Domestic Market Vehicle Maps. Minor initial tuning may be required, this makes the initial tuning process much quicker. As with all other fuel controllers, the Apexi Power FC should be tuned on a dynomometer by a trained professional.
Engine Tuning
Setting Mode allows full access to the 20×20 ignition timing and fuel correction maps. The user can adjust any portion of this map.
Out of stock