Hypertech’s Max Energy power programmers extract every bit of energy possible from every molecule of fuel, increasing miles-per-gallon at part throttle and horsepower at wide-open throttle. Max Energy programmers are even Internet updateable with the included USB cable.
Additional features (depending on the vehicle application) include:
* Raise the top-speed limiter to match the speed rating of high performance tires
* Raise the engine’s rpm limiter for increased performance
* Adjust individual automatic transmission shift points and shift firmness
* Recalibrate speedometer and odometer for non-stock tire sizes and/or gear ratio changes
* Lower the cooling fan on/off temperatures to match the thermostat rating
* Read and clear diagnostic trouble codes and turn off “check engine” lights
* Ability to adjust settings or go back to stock calibration at any time.
Notes:
Some vehicle applications require programmer updates before installation. Please read all instructions and check the manufacturer’s website for these tuning updates before installing the programmer on your vehicle.
Related Products
- AED: د.إ 914
Condition : used.
Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) The factory engine harness does not need to be replaced and all critical accessories such as air conditioning continue to function. By using the optional Apexi Power FC Commander, the user can adjust and modify a wide range of settings. By changing various parameters and data, the Apexi Power FC will adapt to any of your performance needs.
1 in stock
- AED: د.إ 804
The 250 PSI (17230KPa) Honeywell MLH pressure sensor is a 0 to 250 PSI gauge pressure sensor suitable for use with fluids in applications such as fuel, oil or coolant pressure.
1 in stock
- AED: د.إ 3.599
This cluster was oem 180km and we replaced the nismo speedometer 320km with motor , so it will running real 320km in the speedometer not just face design.
1 in stock
1 in stock
- AED: د.إ 1.083
2003-2006 Dodge Ram 1500-3500 5.7L Hemi
2005-2006 Dodge Durango, Jeep Commander, Jeep Grand Cherokee 5.7L Hemi
2007-2008 Dodge Grand Caravan, Jeep Wrangler, Pacifica 3.8L V6
2 in stock
- AED: د.إ 727
Used in many aftermarket ECU applications such as Haltech, Link, Motec, Emtron etc.
Also used in Innovate & AEM stand alone wideband gauges. Commonly used with dynos such as Mainline.
2 in stock
- AED: د.إ 4.256
Discontinued Item.
Brand new.
Universal for jdm cars.
1 in stock
- AED: د.إ 878
Condition : used.
Installation
Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) The factory engine harness does not need to be replaced and all critical accessories such as air conditioning continue to function. By using the optional Apexi Power FC Commander, the user can adjust and modify a wide range of settings. By changing various parameters and data, the Apexi Power FC will adapt to any of your performance needs.
The Apexi Power FC also comes preprogrammed with several base maps. (Currently with Japan Domestic Market Vehicle Maps. Minor initial tuning may be required, this makes the initial tuning process much quicker. As with all other fuel controllers, the Apexi Power FC should be tuned on a dynomometer by a trained professional.
Engine Tuning
Setting Mode allows full access to the 20×20 ignition timing and fuel correction maps. The user can adjust any portion of this map.
Out of stock
- AED: د.إ 1.465
Condition : used.
Setting Mode allows full access to the 20×20 ignition timing and fuel correction maps. The user can adjust any portion of this map.
1 in stock
- AED: د.إ 2.350
MoTeC LTC (Lambda to CAN) module interprets the data from a wideband Lambda sensor and transmits sensor data for monitoring, control and diagnostics on a CAN bus.
It is compatible with any ECU, Dash or Logger present on the bus.
Available in several variants:
Bosch LSU 4.9 or NTK Lambda sensor.
Single or Dual sensor version.
200 or 650mm lengths (LTC Long)
1 in stock