GMC Hypertech Max Energy Power Programmers
$ 285,00
- AED: د.إ 1.047
Computer Programmer, Max Energy, Chevy, GMC, Pickup/SUV, 4.8/5.3/6.0/6.2L,ย V8,ย Each.
Hypertech’s Max Energy power programmers extract every bit of energy possible from every molecule of fuel, increasing miles-per-gallon at part throttle and horsepower at wide-open throttle. Max Energy programmers are even Internet updateable with the included USB cable.
Additional features (depending on the vehicle application) include:
* Raise the top-speed limiter to match the speed rating of high performance tires
* Raise the engine’s rpm limiter for increased performance
* Adjust individual automatic transmission shift points and shift firmness
* Recalibrate speedometer and odometer for non-stock tire sizes and/or gear ratio changes
* Lower the cooling fan on/off temperatures to match the thermostat rating
* Read and clear diagnostic trouble codes and turn off “check engine” lights
* Ability to adjust settings or go back to stock calibration at any time.
Notes:
Some vehicle applications require programmer updates before installation. Please read all instructions and check the manufacturer’s website for these tuning updates before installing the programmer onย yourย vehicle.
Related Products
- AED: د.إ 826
Defi-Link Display is a multipurpose monitor which provides information on speed, oil temperature, water temperature, oil pressure, fuel pressure, and exhaust temperature by connecting to the Defi-Link Control Unit II or the Defi-Link Control Unit.
Universal for jdm cars
Condition : New.
1 in stock
- AED: د.إ 914
Condition : used.
Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) The factory engine harness does not need to be replaced and all critical accessories such as air conditioning continue to function. By using the optional Apexi Power FC Commander, the user can adjust and modify a wide range of settings. By changing various parameters and data, the Apexi Power FC will adapt to any of your performance needs.
1 in stock
- AED: د.إ 474
Used.
Normal condition, recommended to change the cluster glass.
No cracks , workingย perfectly.
1 in stock
- AED: د.إ 2.350
MoTeC LTC (Lambda to CAN) module interprets the data from a wideband Lambda sensor and transmits sensor data for monitoring, control and diagnostics on a CAN bus.
It is compatible with any ECU, Dash or Logger present on the bus.
Available in several variants:
Bosch LSU 4.9 or NTK Lambda sensor.
Single or Dual sensor version.
200 or 650mm lengthsย (LTCย Long)
1 in stock
1 in stock
- AED: د.إ 676
The Delco air temperature sensor is an analogue sensor with a general working range of 0 to 110 ยฐC.
1 in stock
- AED: د.إ 40
This is the vehicle Specific harness required for the Installation of HKS Turbo timer.
3 in stock
- AED: د.إ 878
Condition : used.
Installation
Installation is as easy as replacing the factory ECU. (Some minor rewiring is required on select vehicles.) The factory engine harness does not need to be replaced and all critical accessories such as air conditioning continue to function. By using the optional Apexi Power FC Commander, the user can adjust and modify a wide range of settings. By changing various parameters and data, the Apexi Power FC will adapt to any of your performance needs.
The Apexi Power FC also comes preprogrammed with several base maps. (Currently with Japan Domestic Market Vehicle Maps. Minor initial tuning may be required, this makes the initial tuning process much quicker. As with all other fuel controllers, the Apexi Power FC should be tuned on a dynomometer by a trained professional.
Engine Tuning
Setting Mode allows full access to the 20×20 ignition timing and fuel correction maps. The user can adjust any portionย ofย thisย map.
Out of stock
- AED: د.إ 327
Universal for jdm cars.
2 in stock
- AED: د.إ 1.047
Computer Programmer, Max Energy, Ford, Pickup/SUV, 4.2/5.4L, V6/V8, Each
1 in stock
- AED: د.إ 40
This item is the vehicle Specific harness required for the Installation of HKS Turbo timer.
4 in stock